ao56.com
单管软管泵特点:
动力消耗少，可精确计量输出；易损件少，更换时间短；独特无密封结构，不会产生泄露；自吸能力强，可达8米；可正反向运转，具有自清理能力；压轴采用滚动摩擦，泵腔无需加油；结构简单，操作维修方便；出口压力 可达1.6Mpa；输送高粘度、高固含量、固体颗粒、纤维物质、及其他杂志等液物料，不会产生任何堵塞。
Less power consumption, accurate metering output; less wearing parts, short replacement time; unique non-sealed structure, no leakage; strong self-priming ability, up to 8 meters; can run forward and reverse, with self-cleaning ability; final shaft Rolling friction, no need to refuel the pump cavity; simple structure, convenient operation and maintenance; outlet pressure up to 1.6Mpa; conveying high viscosity, high solid content, solid particles, fibrous material, and other magazines and other liquid materials, without any blockage .
（1）侧导辊每隔24小时用油枪从注油咀注油（高温锂基脂GB5671—91）一次，注油时注意侧导辊的松紧情况，若发现过松，用尖咀钳将其旋紧，使侧导辊处于良好的润滑状态，如发现侧导辊有异常声音，经调整松紧，仍不能消除，应考虑侧导辊内铜套是否磨损，将其拆下换铜套。
（2）压辊每隔三个月拆下来保养一次，给内腔和轴承加高温锂基脂（GB5671—91）。
（3）转子轴承每隔三个月加高温锂基脂（GB5671—91）一次。
（4）新的减速机在运行一段时间后，将油箱内的机油放掉，重新加30＃机油。
宁波豫信致诚机械设备有限公司占地1000平方米，经营各类【拦水带成型机】产品，以质量过硬、供货快捷和价格优势，在激烈的竟争市场中脱颖而出，稳步发展，得到了众多客户的认可和一致好评。面对未来的发展，我公司员工会一如既往的坚持生产高品质【拦水带成型机】产品、提供专业的技术支持、完善的售后服务，与新老客户一起实现双赢，为【拦水带成型机】行业做出自己的贡献。
软管泵的工作原理及应用：软管在泵体内呈U形布置。当旋转体带动挤压轮旋转时，挤压软管受到挤压轮的挤压而发生弹性变形，然后吸入口形成负压吸浆。通过挤压轮的推动，浆液从出料口排出，形成浆液的压力输送。工业软管泵主要应用于建筑、地下工程、矿山、食品、造纸、陶瓷等领域的粘性浆液远距离输送、计量泵送、压力灌浆、喷射等。
Working principle and application of hose pump: The hose is arranged in a U-shape in the pump body. When the rotating body drives the extrusion wheel to rotate, the extrusion hose is elastically deformed by the extrusion wheel, and then the suction port forms a negative pressure suction slurry. By the push of the squeeze wheel, the slurry is discharged from the discharge port, forming a pressure transfer of the slurry. Industrial hose pumps are mainly used for the long-distance transportation of viscous slurry in the fields of construction, underground engineering, mining, food, papermaking, ceramics, metering pumping, pressure grouting, spraying, etc.
还有一种食品级橡胶软管泵，它的内衬的橡胶层需要达到了食品卫生的要求，同时也需要符合EHEDG或者其他卫生级的要求。还有三元乙丙橡胶软管泵，这种一般适用于绝大多数腐蚀性的化学物质和无机物，内衬橡胶层由三元乙丙橡胶构成，外层也是完整的三元乙丙橡胶。这样的软管具备很强的抗化学腐蚀的特性。以及CSM软管泵，它适用于特别腐蚀性的化学介质，如：强氧化溶剂。软管的内层是CSM，外层是天然橡胶。运行温度达到85℃/185°F。
There is also a food-grade rubber hose pump. Its rubber layer must meet food hygiene requirements, and it must also meet EHEDG or other sanitary requirements. There is also a EPDM hose pump, which is generally suitable for most corrosive chemicals and inorganic materials. The inner rubber layer is composed of EPDM rubber, and the outer layer is also a complete EPDM rubber. Such hoses have strong chemical resistance. And CSM hose pump, it is suitable for particularly corrosive chemical media, such as: strong oxidizing solvents. The inner layer of the hose is CSM and the outer layer is natural rubber. Operating temperature reaches 85 ° C / 185 ° F.
